STEERING WHEEL INSTALLATION

PROCEDURE

1. INSTALL TRANSMISSION SHIFT SWITCH ASSEMBLY

   Click here

2. INSTALL LOWER STEERING WHEEL BOSS COVER

   
   

   1. w/o Shift Paddle Switch

      
      

      1. Attach the 2 guide pins and 4 claws to install the lower steering wheel boss cover.

   2. w/ Shift Paddle Switch

      
      

      1. Install the 2 screws.

      2. Attach the 2 guide pins and 4 claws to Install the lower steering wheel boss cover.

3. INSTALL STEERING SHAKE DAMPER (for GD Series Engine)

   
   

   1. Install the steering shake damper with the 2 screws.

4. ADJUST SPIRAL CABLE

   Click here

5. INSTALL STEERING WHEEL ASSEMBLY

   
   

   1. Align the matchmarks on the steering wheel assembly and steering main shaft.

   2. Install the steering wheel set nut.

      Torque:

      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

6. INSTALL CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System)

   Click here

7. INSTALL STEERING PAD SWITCH ASSEMBLY

   Click here

8. INSTALL STEERING WHEEL PAD ASSEMBLY

   Click here

9. INSPECT STEERING WHEEL CENTER POINT

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

11. CHECK SRS WARNING LIGHT

    Click here