OUTER REAR VIEW MIRROR GLASS REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for RHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE OUTER MIRROR LH


    1. B003JU5C01
      B003KT0 Protective Tape
      B003R2S Push

      Push the lower part of the mirror surface and tilt it.

    2. Put protective tape as shown in the illustration.

    3. B003O4GC01
      B003KT0 Protective Tape
      B003R2S Push

      Push the upper part of the mirror surface and tilt it.

    4. Put protective tape as shown in the illustration.

    5. B003L5UC01
      B003R2S Push
      B003OFB Remove in this Direction

      Using moulding remover D, detach the claw of the outer mirror LH as shown in the illustration.

    6. Push the lower part of the mirror surface and tilt it.

      Tech Tips

      The claw will be attached again if the mirror surface is pushed with excessive force.

    7. B003RZ4C01
      B003R2S Push
      B003OFB Remove in this Direction

      Using moulding remover D, detach the claw and remove the outer mirror LH as shown in the illustration.