FRONT WIPER MOTOR ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)


    1. B003PXTC01
      *A for LH Side
      *B for RH Side
      *a Ceramic Dot
      *b Louver Edge
      *c 19.5 to 34.5 mm (0.7677 to 1.3583 in.)
      *d 18.9 mm (0.7441 in.)
      *e 22.7 to 37.7 mm (0.8937 to 1.4842 in.)
      *f 24 mm (0.9449 in.)

      Check the automatic stop (park) position.


      1. Operate the windshield wiper motor assembly, and then stop the operation. Check the wiper arm automatic stop (park) position.

        OK
        Wiper arm stops at the position shown in the illustration.

        Tech Tips

        After the wiper arm stops, lift it up 2 times and check the position.

  2. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)


    1. B003J6CC01
      *A for RH Side
      *B for LH Side
      *a Ceramic Dot
      *b Louver Edge
      *c 19.5 to 34.5 mm (0.7677 to 1.3583 in.)
      *d 18.9 mm (0.7441 in.)
      *e 22.7 to 37.7 mm (0.8937 to 1.4842 in.)
      *f 24 mm (0.9449 in.)

      Check the automatic stop (park) position.


      1. Operate the windshield wiper motor assembly, and then stop the operation. Check the wiper arm automatic stop (park) position.

        OK
        Wiper arm stops at the position shown in the illustration.

        Tech Tips

        After the wiper arm stops, lift it up 2 times and check the position.