FUEL LID LOCK CONTROL CABLE ASSEMBLY(for LHD) INSTALLATION

PROCEDURE


  1. INSTALL FUEL FILLER OPENING LID LOCK RETAINER

    B003P6UC01
    B003OFB Install in this Direction

    1. Install a new fuel filler opening lid lock retainer as shown in the illustration.

  2. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

    B003MJOC01
    B003OFB Install in this Direction

    1. Attach the claw to install the fuel lid lock control cable sub-assembly to the fuel filler opening lid lock retainer as shown in the illustration.

    2. Attach the fuel lid lock control cable sub-assembly to each clamp as shown in the illustration.

      B003R1KC02
      *A for 4WD without VSC - -
      *1 Fuel Lid Lock Control Cable Sub-assembly - -

  3. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY


    1. B003QHN

      Attach the claw to install the fuel lid lock open lever sub-assembly.

  4. INSTALL FRONT FLOOR CARPET ASSEMBLY


    1. Install the front floor carpet assembly.

  5. INSTALL QUARTER INSIDE TRIM BOARD LH

    Click here

  6. INSTALL REAR NO. 2 SEAT OUTER LAP BELT ANCHOR COVER

    Click here

  7. INSTALL REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

    Click here

  8. INSTALL BACK DOOR SCUFF PLATE

    Click here

  9. INSTALL LOWER CENTER PILLAR GARNISH LH

    Click here

  10. INSTALL OUTER LAP BELT ANCHOR COVER

    Click here

  11. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  12. INSTALL COWL SIDE TRIM BOARD LH

    Click here

  13. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here

  14. INSTALL REAR NO. 2 SEAT ASSEMBLY LH

    Click here

  15. INSTALL FRONT SEAT ASSEMBLY LH


    1. for Manual Seat:

      Click here

    2. for Power Seat:

      Click here