FUEL LID LOCK CONTROL CABLE ASSEMBLY(for LHD) REMOVAL

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY LH


    1. for Manual Seat:

      Click here

    2. for Power Seat:

      Click here

  2. REMOVE REAR NO. 2 SEAT ASSEMBLY LH

    Click here

  3. REMOVE FRONT DOOR SCUFF PLATE LH

    Click here

  4. REMOVE COWL SIDE TRIM BOARD LH

    Click here

  5. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

  6. REMOVE OUTER LAP BELT ANCHOR COVER

    Click here

  7. REMOVE LOWER CENTER PILLAR GARNISH LH

    Click here

  8. REMOVE BACK DOOR SCUFF PLATE

    Click here

  9. REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

    Click here

  10. REMOVE REAR NO. 2 SEAT OUTER LAP BELT ANCHOR COVER

    Click here

  11. REMOVE QUARTER INSIDE TRIM BOARD LH

    Click here

  12. REMOVE FRONT FLOOR CARPET ASSEMBLY


    1. Partially remove the floor carpet.

      Tech Tips

      It is not necessary to fully remove the floor carpet. Partially remove it so that the fuel lid lock control cable sub-assembly can be removed in a later step.

  13. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY


    1. B003QHN

      Detach the claw and remove the fuel lid lock open lever sub-assembly.

  14. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY


    1. Detach each clamp as shown in the illustration.

      B003R1KC01
      *1 Fuel Lid Lock Control Cable Sub-assembly - -
    2. B003OQ2C01
      B003OFB Remove in this Direction

      Detach the claw and remove the fuel lid lock control cable sub-assembly from the fuel filler opening lid lock retainer as shown in the illustration.

  15. REMOVE FUEL FILLER OPENING LID LOCK RETAINER


    1. B003Q63C01
      *a 90°
      B003OFB Remove in this Direction (1)
      B003QYY Remove in this Direction (2)
      B003OFV Remove in this Direction (3)

      Remove the fuel filler opening lid lock retainer as shown in the illustration.