BACK DOOR SUPPORT INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL UPPER BACK DOOR DAMPER STAY BRACKET LH


    1. Clean the threaded portion on the vehicle body with non-residue solvent.

    2. B003QHPN01

      Temporarily install the upper back door damper stay bracket LH.

    3. Tighten 2 new bolts to install the upper back door damper stay bracket LH.

      Tech Tips

      Tighten the 2 bolts in the order shown in the illustration.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

  2. INSTALL LOWER BACK DOOR DAMPER STAY BRACKET LH


    1. Clean the threaded portion on the vehicle body with non-residue solvent.

    2. B003KQ5N01

      Temporarily install the lower back door damper stay bracket LH.

    3. Tighten 2 new bolts to install the lower back door damper stay bracket LH.

      Tech Tips

      Tighten the 2 bolts in the order shown in the illustration.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

  3. INSTALL BACK DOOR STAY ASSEMBLY LH


    1. When reusing the back door stay assembly LH:


      1. B003SBZ

        Install the back door stay assembly LH with the 2 stop rings.

    2. B003J7N

      Install the back door stay assembly LH.

      Note


      • Install the back door stay assembly while supporting the back door by hand.

      • Check that the back door stay assembly is engaged in the ball joint and that the back door support assembly cannot be pulled out.