BACK DOOR CLOSER ECU INSTALLATION

PROCEDURE


  1. INSTALL MULTIPLEX NETWORK DOOR ECU (w/ Power Back Door)


    1. B003JG8C04
      B003R2S Bolt
      B003LF2 Connector

      Attach the guide and clip to install the multiplex network door ECU.

    2. Install the 2 bolts.

      Torque:
      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

    3. Connect the 2 connectors.

  2. INSTALL MULTIPLEX NETWORK DOOR ECU (w/ Easy Closer)


    1. B003JG8C05
      B003R2S Bolt
      B003LF2 Connector

      Attach the guide and clip to install the multiplex network door ECU.

    2. Install the 2 bolts.

      Torque:
      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

    3. Connect the 2 connectors.

  3. INSTALL BACK DOOR SERVICE HOLE COVER (w/ Cover)

    Click here

  4. INSTALL REAR NO. 3 SPEAKER ASSEMBLY (w/ Back Door Speaker)

    Click here

  5. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  6. INSTALL DOOR PULL HANDLE

    Click here

  7. INSTALL BACK DOOR SIDE GARNISH LH

    Click here

  8. INSTALL BACK DOOR SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  9. INSTALL CENTER BACK DOOR GARNISH

    Click here

  10. INSPECT POWER BACK DOOR SYSTEM (w/ Power Back Door)

    Click here

  11. INSPECT POWER BACK DOOR SYSTEM (w/ Easy Closer)

    Click here