BACK DOOR CLOSER ECU INSTALLATION

PROCEDURE

1. INSTALL MULTIPLEX NETWORK DOOR ECU

   
   

   1. 

      	Bolt
      	Connector

      Attach the guide and clip to install the multiplex network door ECU.

   2. Install the 2 bolts.

      Torque:

      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

   3. Connect the 2 connectors.

2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

   Click here

3. INSTALL DOOR PULL HANDLE

   Click here

4. INSTALL BACK DOOR SIDE GARNISH LH

   Click here

5. INSTALL BACK DOOR SIDE GARNISH RH

   Click here

6. INSTALL CENTER BACK DOOR GARNISH

   Click here

7. INSPECT POWER BACK DOOR SYSTEM

   Click here