POWER BACK DOOR DRIVE UNIT REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE CENTER BACK DOOR GARNISH

    Click here

  2. REMOVE BACK DOOR SIDE GARNISH LH

    Click here

  3. REMOVE BACK DOOR SIDE GARNISH RH

    Click here

  4. REMOVE DOOR PULL HANDLE

    Click here

  5. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  6. REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH

    Click here

  7. REMOVE POWER BACK DOOR UNIT ASSEMBLY SET LH


    1. B003OMK

      Disconnect the connector.

    2. B003M4WC02
      *1 Grommet

      Detach the grommet.

    3. Remove the 4 bolts and power back door unit assembly set LH.

      Note

      Remove the power back door unit assembly set LH while supporting the back door by hand.