POWER BACK DOOR TOUCH SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH


    1. B003O2S

      Attach the clip to install the power back door sensor assembly LH.

    2. Install the 4 screws.

    3. B003LTL

      Connect the connector.

  2. INSTALL BACK DOOR SERVICE HOLE COVER (w/ Cover)

    Click here

  3. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  4. INSTALL DOOR PULL HANDLE

    Click here

  5. INSTALL BACK DOOR SIDE GARNISH LH

    Click here

  6. INSTALL BACK DOOR SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  7. INSTALL CENTER BACK DOOR GARNISH

    Click here