POWER BACK DOOR CONTROL SWITCH INSPECTION

PROCEDURE


  1. INSPECT BACK DOOR CONTROL SWITCH


    1. Check the resistance.


      1. B003PEEC01
        *a

        Component without harness connected

        (Back Door Control Switch)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        4(CLS) - 1 (E) Switch off 10 kΩ or higher
        Switch on Below 1 Ω

        If the result is not as specified, replace the back door control switch.