BACK DOOR CLOSER ECU REMOVAL

PROCEDURE

1. REMOVE CENTER BACK DOOR GARNISH

   Click here

2. REMOVE BACK DOOR SIDE GARNISH LH

   Click here

3. REMOVE BACK DOOR SIDE GARNISH RH

   Tech Tips

   Use the same procedure as for the LH side.

4. REMOVE DOOR PULL HANDLE

   Click here

5. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

   Click here

6. REMOVE REAR NO. 3 SPEAKER ASSEMBLY (w/ Back Door Speaker)

   Click here

7. REMOVE BACK DOOR SERVICE HOLE COVER (w/ Cover)

   Click here

8. REMOVE MULTIPLEX NETWORK DOOR ECU (w/ Power Back Door)

   
   

   1. 

      	Bolt
      	Connector

      Disconnect the 2 connectors.

   2. Remove the 2 bolts.

   3. Detach the clip and guide, remove the multiplex network door ECU.

9. REMOVE MULTIPLEX NETWORK DOOR ECU (w/ Easy Closer)

   
   

   1. 

      	Bolt
      	Connector

      Disconnect the 2 connectors.

   2. Remove the 2 bolts.

   3. Detach the clip and guide, remove the multiplex network door ECU.