BACK DOOR REASSEMBLY

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL DOOR DUST PROOF SEAL

   
   

   1. 

      Attach the claw and install 3 new door dust proof seals.

2. INSTALL BACK DOOR STOPPER CUSHION

   
   

   1. 

      Attach the claw to install a new back door stopper cushion.

      Tech Tips

      Use the same procedure as for the RH side.

3. INSTALL LOWER BACK DOOR STOPPER

   
   

   1. 

      Attach the guide to install the lower back door stopper with the bolt.

      Tech Tips

      Use the same procedure as for the RH side.

4. INSTALL REAR WIPER MOTOR ASSEMBLY

   Click here

5. INSTALL BACK DOOR LOCK ASSEMBLY (w/ Power Back Door)

   Click here

6. INSTALL BACK DOOR LOCK ASSEMBLY (w/o Power Back Door)

   Click here

7. INSTALL POWER BACK DOOR WARNING BUZZER (w/ Power Back Door)

   Click here

8. INSTALL MULTIPLEX NETWORK DOOR ECU (w/ Power Back Door)

   Click here

9. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Parking Assist Monitor System)

   Click here

10. INSTALL LICENSE PLATE LIGHT ASSEMBLY LH

    Click here

11. INSTALL LICENSE PLATE LIGHT ASSEMBLY RH

    Click here

12. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY

    Click here

13. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

14. INSTALL REAR LIGHT ASSEMBLY LH

    Click here

15. INSTALL REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

16. INSTALL NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (w/ Smart Entry and Start System)

    Click here

17. INSTALL BACK DOOR DAMPER ASSEMBLY

    
    

    1. 

       Attach the guide.

    2. Install the back door damper assembly with the 3 bolts.

18. INSTALL REAR WASHER NOZZLE

    Click here

19. INSTALL REAR SPOILER ASSEMBLY

    Click here

20. INSTALL BACK DOOR GLASS CHANNEL LH

    Click here

21. INSTALL BACK DOOR GLASS CHANNEL RH

    Tech Tips

    Use the same procedure as for the LH side.

22. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)

    Click here

23. INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)

    Tech Tips

    Use the same procedure as for the LH side.

24. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

    
    

    1. 

       Attach the clip to install the back door trim board assembly.

25. INSTALL BACK DOOR CONTROL SWITCH (w/ Power Back Door)

    Click here

26. INSTALL SPARE SWITCH HOLE COVER (w/o Power Back Door)

    
    

    1. 

       Attach the claw to install the spare switch hole cover.

27. INSTALL DOOR PULL HANDLE

    
    

    1. w/ Power Back Door:

       Connect the connector.

    2. 

       Attach the claw to install the door pull handle.

28. INSTALL BACK DOOR SIDE GARNISH LH

    
    

    1. 

       Attach the claw and clip to install the back door side garnish LH.

29. INSTALL BACK DOOR SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

30. INSTALL CENTER BACK DOOR GARNISH

    
    

    1. 

       Attach the claw and clip to install the center back door garnish.

31. INSTALL REAR WIPER MOTOR GROMMET

    Click here

32. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY

    Click here

33. INSTALL REAR WIPER ARM HEAD CAP

    Click here

34. INSPECT POWER BACK DOOR SYSTEM (w/ Power Back Door)

    Click here