BACK DOOR OPENER SWITCH INSPECTION

PROCEDURE


  1. INSPECT BACK DOOR OPENER SWITCH ASSEMBLY (w/ Smart Entry and Start System)


    1. Check the operation of the back door opener switch.


      1. B003RGQC01
        *a

        Component without harness connected

        (Back Door Opener Switch Assembly)
        *b Open Switch
        *c Lock Switch

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        2 (E) - 3 (UL) Back door opener switch not pushed (OFF) 10 kΩ or higher
        2 (E) - 3 (UL) Back door opener switch pushed (ON) Below 1 Ω

        If the result is not as specified, replace the back door opener switch assembly.

    2. Check the operation of the back door lock switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        1 (L) - 2 (E) Back door lock switch not pushed (OFF) 10 kΩ or higher
        1 (L) - 2 (E) Back door lock switch pushed (ON) Below 1 Ω

        If the result is not as specified, replace the back door opener switch assembly.

  2. INSPECT BACK DOOR OPENER SWITCH ASSEMBLY (w/o Smart Entry and Start System)


    1. Check the operation of the back door opener switch.


      1. B003R7WC01
        *a

        Component without harness connected

        (Back Door Opener Switch Assembly)
        *b Open Switch

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        2 (E) - 3 (UL) Back door opener switch not pushed (OFF) 10 kΩ or higher
        2 (E) - 3 (UL) Back door opener switch pushed (ON) Below 1 Ω

        If the result is not as specified, replace the back door opener switch assembly.