HOOD ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT HOOD SUB-ASSEMBLY


    1. Check that the clearance measurements of areas A to D are within the standard ranges.

      B003Q0EN01
      Standard
      Area Specified Condition Area Specified Condition
      A 4.0 to 7.0 mm (0.157 to 0.276 in.) B -0.6 to 2.4 mm (-0.024 to 0.094 in.)
      C 3.5 to 6.5 mm (0.138 to 0.256 in.) D -0.7 to 2.3 mm (-0.028 to 0.091 in.)