HOOD LOCK CONTROL CABLE ASSEMBLY(for LHD) REMOVAL

PROCEDURE


  1. REMOVE NO. 1 RADIATOR GRILLE RETAINER

    Click here

  2. REMOVE HOOD LOCK ASSEMBLY


    1. B003MWZC02
      B003R2S Bolt
      B003LF2 Connector

      Remove the 3 bolts and hood lock assembly.

    2. Disconnect the connector.

    3. B003JV9

      Detach the clamp, disconnect the hood lock control cable assembly and remove the hood lock assembly.

  3. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. B003KX7

      Detach the claw.

    2. B003KJX

      Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.

  4. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY


    1. B003PKYC11
      *1 String

      Tie a string to the end of the hood lock control cable assembly as shown in the illustration.

      Tech Tips

      Use a length of string long enough to pass through the engine compartment.

    2. Detach each clamp and the grommet, and then pull out the hood lock control cable from the vehicle body.

    3. Untie the string from the hood lock control cable assembly.

      B003JRIC03
      *A for Manual Transmission - -
      *1 Hood Lock Control Cable Assembly *2 Grommet
      *3 Clamp - -