POWER WINDOW CONTROL SYSTEM PRECAUTION


  1. POWER WINDOW CONTROL SYSTEM PRECAUTIONS

    Note


    • The power window control system prohibits the auto up and down function when the jam protection function malfunctions.

    • The power window control system prohibits the auto up and down function when the catch protection function malfunctions.

    • If a power window regulator motor assembly has been replaced with a new one, initialize the power window control system.

      Click here

    • When a door window regulator sub-assembly, power window regulator motor assembly, door glass or door glass run is reinstalled or replaced, the power window control system must be initialized. Functions such as the auto up and down function, jam protection function, catch protection function, remote control function and key-off operation function will not operate if initialization is not performed.

      Click here

    • The jam protection function and the catch protection function may operate unexpectedly, even when the power window control system is normal, due to detection of a value different than the operation learned value when the door glass moving speed changes sharply under any of the following conditions:


      1. A power window is being opened or closed while the vehicle is driven on a rough road.

      2. A power window is being opened or closed while the door is being opened or closed.

      3. The voltage changes abruptly.

    • Do not disconnect the battery while the ignition switch ON.

  2. IGNITION SWITCH EXPRESSIONS


    1. The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

      Expression Ignition Switch (Position) Engine Switch (Condition)
      Ignition Switch off LOCK Off (Lock)
      Ignition Switch ACC ACC On (ACC)
      Ignition Switch ON ON On (IG)
      Engine Start START On (Start)