WASHER NOZZLE(for Rear Side) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT REAR WASHER NOZZLE


    1. With the ignition switch turned to ON, check that the center stream of washer fluid sprays on the back door glass within the hatched area shown in the illustration.

      OK
      Washer fluid hits the back door glass in the area shown in the illustration.

      If the result is not as specified, adjust the rear washer nozzle sub-assembly.

      B003QHUC01
      B003KT0 Standard Clearance - -
      Standard
      Area Specified Condition Area Specified Condition
      A 78.9 mm (3.1063 in.) B 126.5 mm (4.9803 in.)

      Note

      If the result is not as specified, adjust the rear washer nozzle.

      Click here