WASHER NOZZLE ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. With the ignition switch turned to ON, check the position that the washer fluid hits the windshield.

      OK
      Washer fluid hits the windshield in the areas shown in the illustration.
      B003OU9C01
      *a Upper Limit *b Standard
      *c Lower Limit - -
      Standard
      Area Measurement Area Measurement
      A 184 mm (7.2441 in.) B 215 mm (8.4646 in.)
      C 115 mm (4.5276 in.) D 197 mm (7.7559 in.)

      Note

      If the result is not as specified, replace the washer nozzle sub-assembly.