WASHER MOTOR INSTALLATION

PROCEDURE


  1. INSTALL WINDSHIELD WASHER JAR ASSEMBLY


    1. B003K11E01

      Install the windshield washer jar assembly with the 3 bolts in the order indicated in the illustration.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Attach the clamp.

  2. INSTALL WASHER INLET SUB-ASSEMBLY


    1. B003NISC01
      B003OFB Install in this Direction

      Install the washer inlet sub-assembly to the windshield washer jar assembly.

    2. Attach the claw and guide.

  3. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. B003J5NC01
      B003R2S Connector
      B003LF2 Rear Washer Hose
      B003OFB Install in this Direction

      Install the windshield washer motor and pump assembly.

    2. Connect the connector.

    3. Connect the rear washer hose.

    4. B003OCD

      Connect the front washer hose.

    5. B003M4CC01
      B003R2S Clip
      B003LF2 Screw
      B003OFB Return in this Direction

      Return the front fender liner LH to its original position as shown in the illustration.

    6. Install the 10 clips.

    7. Install the 3 screws.

    8. B003L56C01
      *a Correct
      *b Incorrect

      Install the pin hold clip as shown in the illustration.

  4. FILL UP WINDSHIELD WASHER JAR WITH WASHER FLUID


    1. Refill the windshield washer fluid.