FRONT WIPER RUBBER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL WIPER RUBBER LH

    B003PPTC01
    B003OFB Install in this Direction

    1. Install the 2 wiper rubber backing plates.

      Note


      • Align the groove of the wiper rubber backing plate with the edge of the wiper rubber LH.

      • Make sure that the wiper rubber backing plate is perpendicular to the glass.

    2. B003LNDC01
      *a Arm Axis Side
      B003OFB Install in this Direction

      Install the wiper rubber LH together with the 2 wiper rubber backing plates to the front wiper blade LH.

      Note

      Push the wiper blade into the groove of the wiper rubber to attach the wiper rubber completely.

      Tech Tips

      Install the wiper rubber LH so that the head part (large side) of the wiper rubber faces the arm axis side.

  2. INSTALL FRONT WIPER BLADE LH

    B003P9LC01
    B003OFB Install in this Direction

    1. Install the front wiper blade LH to the front wiper arm LH as shown in the illustration.

    2. B003PSQC01
      *a Holder
      B003R2S Push Down

      Push down the holder of the front wiper blade LH as shown in the illustration.