REAR DIFFERENTIAL CARRIER ASSEMBLY(w/ Differential Lock) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:


  • B003MKRC03
    *a Object Exceeding Weight Limit of Transmission Jack

    Be sure to perform this procedure with several people as the rear differential carrier assembly is very heavy.

  • Be sure to follow the procedure described in the repair manual, or the transmission jack may suddenly drop or a part may fall.

Tech Tips

The following procedures are for BD22 (w/ Differential Lock).

PROCEDURE


  1. REMOVE REAR WHEEL

    Click here

  2. REMOVE REAR PROPELLER SHAFT ASSEMBLY


    1. for TMT Made:

      Click here

    2. for TMMIN Made:

      Click here

  3. DRAIN DIFFERENTIAL OIL

    Click here

  4. REMOVE REAR AXLE SHAFT WITH BACKING PLATE LH

    Click here

  5. REMOVE REAR AXLE SHAFT WITH BACKING PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  6. REMOVE REAR DIFFERENTIAL PROTECTOR

    Click here

  7. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY


    1. B003QSG

      Disconnect the 2 connectors.

    2. B003N1H

      Remove the 10 nuts, 10 washers and rear differential carrier assembly.

      Note

      Be careful not to damage the contact surface.

      CAUTION:

      The rear differential carrier assembly is a heavy component. Make sure that it is supported securely.

      Note


      • Securely support the rear differential carrier assembly while performing this step to avoid excessively tilting or dropping the rear differential carrier assembly.

      • The remaining oil may leak out when removing the rear differential carrier assembly.

      • Do not damage the installation surface when removing the rear differential carrier assembly.

      • Remove the bolts with the rear differential carrier assembly secured.

  8. REMOVE REAR DIFFERENTIAL CARRIER GASKET