DIFFERENTIAL SYSTEM(w/ Differential Lock) DIAGNOSIS SYSTEM


  1. DESCRIPTION

    The 4 wheel drive control ECU records DTCs when the ECU detects a malfunction in the ECU itself or in system circuits.

    The DTCs can be read through the DLC3 of the vehicle. When the system seems to be malfunctioning, use the GTS to check for malfunctions and perform troubleshooting.

  2. CHECK DLC3


    1. Inspect the battery voltage.

      If the voltage is below 11 V, recharge the battery before proceeding.

    2. Check the DLC3.

      Click here

    3. FUNCTION OF INDICATOR LIGHT


      1. When a problem occurs in the differential system (w/ Differential Lock), the rear differential lock indicator light on the combination meter assembly rapidly blinks* to inform the driver of the problem.

        *: 0.25 second intervals (0.25 seconds on and 0.25 seconds off)

      2. Indicator light (illuminated or blinking) or multi-information display status when DTC is output


        1. except Pre-Runner:

    4. DIFFERENTIAL SYSTEM (w/ Differential Lock)
      DTC No. Rear Differential Lock Indicator Light 4WD Indicator Light (Green) 4LO Indicator Light Multi-information Display Message
      U0122

      Rear differential locked: Illuminated

      Rear differential free: Not illuminated

      Not illuminated Rapidly blinking 2WD-4WD mode change malfunction visit your dealer
      U0416
      P163B
      P17BB Rapidly blinking Status displayed* Status displayed* -
      P17BC
      P17C0
      P17C1
      P17CC


  • for Pre-Runner:

    DIFFERENTIAL SYSTEM (w/ Differential Lock)
    DTC No. Rear Differential Lock Indicator Light
    U0122 Rapidly blinking
    U0416
    P163B
    P17BB
    P17BC
    P17C0
    P17C1
    P17CC

  • CHECK INDICATOR LIGHT


    1. except Pre-Runner:

      With the ignition switch turned to ON and the transfer in H2, press the differential lock switch and check that the rear differential lock indicator light blinks* 3 times.

      *: 0.5 second intervals (0.5 seconds on and 0.5 seconds off)

      for Pre-Runner:

      With the ignition switch turned to ON, press the differential lock switch and check that the rear differential lock indicator light blinks* 3 times.

      *: 0.5 second intervals (0.5 seconds on and 0.5 seconds off)