DIFFERENTIAL SYSTEM(w/ Differential Lock), Diagnostic DTC:U0122

DTC Code DTC Name
U0122 Lost Communication With Vehicle Dynamics Control Module

DESCRIPTION

This DTC is detected if communication is lost with the skid control ECU (brake actuator assembly).

DTC No. Detection Item DTC Detection Condition Trouble Area
U0122 Lost Communication with Vehicle Dynamics Control Module

  • Diagnosis Condition: Ignition switch turned to ON (3 seconds elapse after ignition switch is turned to ON)

  • Malfunction Status: Communication is lost between skid control ECU and 4 wheel drive control ECU

  • Malfunction Time: 0.72 seconds or more

  • Other: 1 trip detection logic

 CAN communication system

CAUTION / NOTICE / HINT

Note


  • except Pre-Runner:

    When the data in the skid control ECU (brake actuator assembly) is being overwritten, a message is displayed on the multi-information display and the 4LO indicator light rapidly blinks due to the 4 wheel drive control ECU detecting a communication malfunction (blinks at 0.25 second intervals (0.25 seconds on and 0.25 seconds off)), but this is not a malfunction.

    for Pre-Runner:

    When the data in the skid control ECU (brake actuator assembly) is being overwritten, the rear differential lock indicator light may rapidly blink due to the 4 wheel drive control ECU detecting a communication malfunction (blinks at 0.25 second intervals (0.25 seconds on and 0.25 seconds off)), but this is not a malfunction.

  • Clear all DTCs, since DTCs are stored after the data in the skid control ECU (brake actuator assembly) is overwritten.

PROCEDURE


  1. PERFORM DTC


    1. Clear the DTCs.

      Click here


      Powertrain > Four Wheel Drive > Clear DTCs

    2. Check if the same DTCs are output.

      Click here


      Powertrain > Four Wheel Drive > Trouble Codes
      Result
      Result Proceed to
      DTC is output A
      DTC is not output B

    A

    CHECK CAN COMMUNICATION SYSTEM for LHD: Click here
    CHECK CAN COMMUNICATION SYSTEM for RHD: Click here

    B

    USE SIMULATION METHOD TO CHECK Click here