REAR AXLE HUB BOLT REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR WHEEL

    Click here

  2. REMOVE PARKING BRAKE ASSEMBLY

    Click here

  3. REMOVE REAR AXLE HUB BOLT


    1. B003NA9C01
      *a Turn
      *b Hold
      *c Nut

      Temporarily install 2 nuts to the 2 rear axle hub bolts as shown in the illustration.

    2. Using SST and a brass bar or equivalent to hold the rear axle shaft, remove the rear axle hub bolt.

      SST
      09650-17011

  4. INSTALL REAR AXLE HUB BOLT


    1. B003JP7C01
      *a Turn
      *b Hold
      *c Plate Washer
      *d Nut

      Install a plate washer and nut to a new rear axle hub bolt as shown in the illustration.

    2. Using a brass bar or equivalent to hold the rear axle shaft, install the rear axle hub bolt by tightening the nut.

    3. Remove the 2 nuts from the 2 rear axle hub bolts.

  5. INSTALL PARKING BRAKE ASSEMBLY

    Click here

  6. INSTALL REAR WHEEL

    Click here