PROPELLER SHAFT ASSEMBLY(for TMT Made) REMOVAL

PROCEDURE


  1. REMOVE PROPELLER SHAFT GUARD


    1. B003Q9F

      for transfer side:

      Remove the 2 bolts and propeller shaft guard.

    2. B003LHE

      for center support bearing side:

      Remove the 2 bolts and propeller shaft guard.

  2. REMOVE PROPELLER SHAFT WITH CENTER BEARING ASSEMBLY


    1. B003KKZC01
      *a Matchmark

      Place matchmarks on the propeller shaft flange and transfer flange.

    2. Remove the 4 nuts and 4 washers and disconnect the propeller shaft.

    3. B003KMZC01
      *a Matchmark

      Place matchmarks on the propeller shaft flange and differential flange.

    4. Remove the 4 nuts and 4 washers.

    5. B003LA0

      Remove the 2 set bolts of the center No. 1 support bearing assembly from the frame crossmember.

    6. Remove the propeller shaft with center bearing assembly.