TRANSFER ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Be sure to perform this procedure with several people as the transfer assembly is very heavy.

PROCEDURE


  1. INSTALL TRANSFER CASE LOWER PROTECTOR


    1. Install the transfer case lower protector with the 4 bolts.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

  2. INSTALL TRANSFER ASSEMBLY


    1. B003KCHC01
      *1 Clamp

      for AC60F:

      Install the transfer assembly and 2 clamps with the 8 bolts.

      Note

      Do not damage the lip of the transfer adaptor oil seal.

      Torque:
      24 N*m  { 245 kgf*cm, 18 ft.*lbf }
    2. B003QD1C01
      *1 Clamp

      for RC61F:

      Install the transfer assembly and clamp with the 8 bolts.

      Note

      Do not damage the lip of the transfer adaptor oil seal.

      Torque:
      24 N*m  { 245 kgf*cm, 18 ft.*lbf }

  3. CONNECT TRANSFER BREATHER HOSE SUB-ASSEMBLY


    1. Connect the 2 transfer breather hose sub-assemblies and attach the 2 clamps.

  4. CONNECT WIRE HARNESS


    1. B003MYYC01
      *A for AC60F
      *B for RC61F

      for AC60F:

      Connect the connector and attach the 3 clamps.

    2. for RC61F:

      Connect the connector and attach the 2 clamps.

  5. CONNECT GROUND WIRE


  6. INSTALL REAR ENGINE MOUNTING INSULATOR


  7. INSTALL NO. 3 FRAME CROSSMEMBER SUB-ASSEMBLY


  8. INSTALL PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY

    Click here

  9. INSTALL FRONT PROPELLER SHAFT ASSEMBLY

    Click here

  10. ADD TRANSFER OIL

    Click here

  11. CHECK FOR TRANSFER OIL LEAK