MANUAL TRANSMISSION OIL REPLACEMENT

PROCEDURE


  1. DRAIN MANUAL TRANSMISSION OIL


    1. Remove the manual transmission filler plug and gasket.

    2. Remove the drain plug sub-assembly and gasket and then drain the manual transmission oil.

    3. Install a new gasket and the drain plug sub-assembly.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

  2. ADD MANUAL TRANSMISSION OIL


    1. B003S2AC07
      *a 0 to 5.0 mm (0 to 0.196 in.)

      Add manual transmission oil until the oil level is within 0 to 5 mm (0 to 0.196 in.) from the bottom of the manual transmission case plug opening.

      Oil grade Oil viscosity Standard capacity
      Manual transmission gear oil GL-3 SAE 75W-90 2.5 liters (2.6 US qts, 2.2 Imp. qts)

  3. INSPECT MANUAL TRANSMISSION OIL

    Click here