CLUTCH RELEASE CYLINDER REASSEMBLY

PROCEDURE


  1. INSTALL RELEASE CYLINDER BLEEDER PLUG


    1. Install the release bleeder plug to the cylinder body.

      Torque:
      11.8 N*m  { 120 kgf*cm, 9 ft.*lbf }

    2. Install the bleeder plug cap to the bleeder plug.

  2. INSTALL CLUTCH RELEASE CYLINDER KIT


    1. Install 2 new cylinder cups to a new piston.

    2. B003N4AC10
      B003R2S Lithium soap base glycol grease

      Apply lithium soap base glycol grease to the portions indicated by the arrows in the illustration.

    3. Install a new spring to the piston.

    4. Install the release cylinder piston together with the spring to the cylinder body.

      Note

      Do not damage the inside of the cylinder body.

    5. Install the No. 1 clutch release cylinder push rod to the clutch cylinder boot.

    6. Install the clutch release cylinder boot together with the No. 1 clutch release cylinder push rod to the release cylinder body.