CLUTCH MASTER CYLINDER(w/o Turn Over) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. DRAIN CLUTCH FLUID

    Note

    Wash off clutch fluid immediately if it comes into contact with a painted surface.

  2. DISCONNECT CLUTCH RESERVOIR TUBE


    1. B003PNU

      Slide the clip and disconnect the clutch reservoir tube from the clutch master cylinder assembly.

      Tech Tips

      Use a container to collect the fluid.

  3. DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE


    1. B003KSD

      Using a union nut wrench, disconnect the clutch master cylinder to flexible hose tube.

      Tech Tips

      Use a container to collect the fluid.

  4. DISCONNECT CLUTCH MASTER CYLINDER PUSH ROD CLEVIS

    Click here

  5. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY


    1. B003M7K

      Remove the 2 nuts, clutch master cylinder assembly and gasket.

  6. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS


    1. Loosen the lock nut, and then remove the master cylinder push rod clevis and lock nut from the push rod.

      Note

      When loosening the lock nut, be sure to hold the clevis in place by its square portion.