OIL PUMP REASSEMBLY

PROCEDURE

1. INSTALL FRONT OIL PUMP OIL SEAL

   
   

   1. 

      Using SST and a hammer, install a new front oil pump oil seal to the front oil pump body sub-assembly.

      SST

      09350-30020   ( 09351-32140 )

      Standard depth
      -0.3 to 0.3 mm (-0.0118 to 0.0118 in.)

   2. Coat the lip of the front oil pump oil seal with MP grease.

2. SECURE FRONT OIL PUMP BODY SUB-ASSEMBLY

   
   

   1. Place the front oil pump body sub-assembly on the torque converter assembly.

3. INSTALL FRONT OIL PUMP DRIVEN GEAR

   
   

   1. 

      Coat the front oil pump driven gear with ATF and install it to the front oil pump body sub-assembly.

4. INSTALL FRONT OIL PUMP DRIVE GEAR

   
   

   1. 

      Coat the front oil pump drive gear with ATF and install it to the front oil pump body sub-assembly.

5. INSTALL STATOR SHAFT ASSEMBLY

   
   

   1. Align the bolt holes of the stator shaft assembly with the bolt holes of the front oil pump body sub-assembly and install the stator shaft assembly to the front oil pump body sub-assembly.

   2. 

      Using a T30 "TORX" socket wrench, install the 7 screws.

      Torque:

      10.8 N*m  { 110 kgf*cm, 8 ft.*lbf }

6. INSTALL FRONT OIL PUMP PLATE

   
   

   1. 

      Using a T30 "TORX" socket wrench, install the front oil pump plate with the 3 screws.

      Torque:

      10.8 N*m  { 110 kgf*cm, 8 ft.*lbf }

7. INSPECT OIL PUMP DRIVE GEAR ROTATION

   Click here

8. INSTALL CLUTCH DRUM OIL SEAL RING

   
   

   1. 

      Coat 2 new clutch drum oil seal rings with ATF and install them to the oil pump assembly.

      Note

      
      

      • Do not expand the gap of the clutch drum oil seal rings excessively.

      • After installing the clutch drum oil seal rings, check that they rotate smoothly.

9. INSTALL FRONT OIL PUMP BODY O-RING

   
   

   1. 

      Coat a new front oil pump body O-ring with ATF and install it to the oil pump assembly.