VALVE BODY ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL MANUAL VALVE


    1. Coat the manual valve with ATF and install it to the transmission valve body assembly.

  2. INSTALL TRANSMISSION CASE GASKET


    1. Coat 2 new transmission case gaskets with ATF, and install them to the automatic transmission case sub-assembly.

  3. INSTALL TRANSMISSION VALVE BODY ASSEMBLY


    1. B003N1XC02
      *1 Manual Valve Lever Sub-assembly
      *2 Manual Valve

      Insert the manual valve lever sub-assembly into the groove on the end of the manual valve and install the transmission valve body assembly to the automatic transmission case sub-assembly with the 12 bolts.

      Torque:
      11 N*m  { 112 kgf*cm, 8 ft.*lbf }
      Bolt Length
      Item Length
      Bolt A 25 mm (0.984 in.)
      Bolt B 36 mm (1.42 in.)
      Bolt C 50 mm (1.97 in.)

    2. Install the detent spring and detent spring cover to the transmission valve body assembly with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  4. INSTALL VALVE BODY OIL STRAINER ASSEMBLY


    1. Coat a new O-ring with ATF, and install it to the valve body oil strainer assembly.

    2. Install the valve body oil strainer assembly to the transmission valve body assembly with the 3 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  5. CONNECT TRANSMISSION WIRE

    Click here

  6. RESET MEMORY

    Note

    Perform Reset Memory (AT initialization) when replacing the transmission valve body assembly or any of the shift solenoid valves.

    for 1GR-FE:

    Click here

    for 2TR-FE:

    Click here

    for 1GD-FTV:

    Click here

    for 2GD-FTV:

    Click here