OIL PUMP DISASSEMBLY

PROCEDURE


  1. REMOVE FRONT OIL PUMP BODY O-RING


    1. B003NAA

      Remove the front oil pump body O-ring from the oil pump assembly.

  2. SECURE OIL PUMP ASSEMBLY


    1. B003R5M

      Place the oil pump assembly on the torque converter assembly.

  3. REMOVE CLUTCH DRUM OIL SEAL RING


    1. B003J6Z

      Remove the 2 clutch drum oil seal rings from the oil pump assembly.

  4. INSPECT OIL PUMP DRIVE GEAR ROTATION

    Click here

  5. REMOVE FRONT OIL PUMP PLATE


    1. B003JDS

      Using a T30 "TORX" socket wrench, remove the 3 screws and front oil pump plate from the oil pump assembly.

  6. REMOVE STATOR SHAFT ASSEMBLY


    1. B003RSM

      Using a T30 "TORX" socket wrench, remove the 7 screws and stator shaft assembly from the front oil pump body sub-assembly.

  7. INSPECT STATOR SHAFT ASSEMBLY

    Click here

  8. INSPECT OIL PUMP ASSEMBLY

    Click here

  9. REMOVE FRONT OIL PUMP DRIVE GEAR


    1. B003JKR

      Remove the front oil pump drive gear from the front oil pump body sub-assembly.

  10. REMOVE FRONT OIL PUMP DRIVEN GEAR


    1. B003KQD

      Remove the front oil pump driven gear from the front oil pump body sub-assembly.

  11. REMOVE FRONT OIL PUMP OIL SEAL


    1. B003N12C01
      *a Protective Tape

      Using a screwdriver, remove the front oil pump oil seal from the front oil pump body sub-assembly.

      Note

      Do not damage the bushing or front oil pump body sub-assembly.

      Tech Tips

      Tape the screwdriver tip before use.

  12. INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY

    Click here