VANE PUMP(for 1GR-FE) REMOVAL

PROCEDURE


  1. REMOVE FAN AND GENERATOR V BELT

    Click here

  2. REMOVE FRONT FENDER APRON SEAL RH


    1. Detach the 6 clips and remove the front fender apron seal RH.

  3. DISCONNECT NO. 1 OIL RESERVOIR TO PUMP HOSE


    1. B003LQU

      Slide the clip and disconnect the No. 1 oil reservoir to pump hose.

    2. Drain the power steering fluid.

  4. DISCONNECT PRESSURE FEED TUBE ASSEMBLY


    1. B003MGH

      Disconnect the power steering oil pressure switch connector.

    2. Remove the union bolt, then disconnect the pressure feed tube assembly.

    3. Remove the gasket from the pressure feed tube assembly.

  5. REMOVE VANE PUMP ASSEMBLY


    1. B003LD2

      Remove the 2 bolts and vane pump assembly.