PARKING BRAKE CABLE REMOVAL

PROCEDURE


  1. REMOVE REAR WHEEL

    Click here

  2. DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH


    1. B003MSQ

      Remove the 2 bolts and disconnect the rear disc brake cylinder assembly LH.

      Note


      • Do not disconnect the flexible hose from the rear disc brake cylinder assembly LH.

      • Do not twist or bend the flexible hose.

  3. DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  4. REMOVE REAR DISC

    Click here

  5. REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY

    Click here

  6. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)

    Click here

  7. REMOVE FRONT SEAT ASSEMBLY (for Power Seat)

    Click here

  8. REMOVE FRONT DOOR SCUFF PLATE LH

    Click here

  9. REMOVE FRONT DOOR SCUFF PLATE RH

    Click here

  10. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

  11. REMOVE REAR DOOR SCUFF PLATE RH

    Click here

  12. REMOVE LOWER CENTER PILLAR GARNISH LH

    Click here

  13. REMOVE LOWER CENTER PILLAR GARNISH RH

    Click here

  14. REMOVE INTERMEDIATE LEVER PROTECTOR


    1. Partially remove the floor carpet.

      Tech Tips

      It is not necessary to fully remove the floor carpet. Partially remove it so that the intermediate lever protector can be removed in a later step.

    2. B003LN3

      Remove the 3 bolts and intermediate lever protector with No. 2 console box mounting bracket.

  15. REMOVE NO. 2 CONSOLE BOX MOUNTING BRACKET


    1. B003L8H

      Remove the 2 bolts and No. 2 console box mounting bracket from the intermediate lever protector.

  16. REMOVE PARKING BRAKE CABLE HEAT INSULATOR


    1. B003MR1

      Remove the 2 bolts and parking brake cable heat insulator.

  17. REMOVE NO. 2 PARKING BRAKE CABLE HEAT INSULATOR


    1. B003PXJ

      Remove the 2 bolts and No. 2 parking brake cable heat insulator.

  18. REMOVE PROPELLER SHAFT ASSEMBLY

    Click here

  19. REMOVE FUEL TANK

    Click here

  20. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY


    1. Remove the 2 bolts (labeled A).

      B003JW7C01
      *1 No. 1 Parking Brake Cable Assembly *2 No. 2 Parking Brake Cable Assembly
      *3 No. 3 Parking Brake Cable Assembly *4 Parking Brake Equalizer Sub-assembly
      *5 Cable Support Bracket - -

    2. Remove the clip and pin from the No. 3 parking brake cable assembly.

    3. Disconnect the No. 1 parking brake cable assembly from the No. 3 parking brake cable assembly.

    4. Disconnect the No. 1 parking brake cable assembly from the parking brake equalizer sub-assembly.

    5. Disconnect the No. 1 parking brake cable assembly from the cable support bracket.

    6. Remove the No. 1 parking brake cable assembly from inside the vehicle.

    7. Remove the bolt (labeled B) and cable support bracket.

  21. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY


    1. Disconnect the No. 2 parking brake cable assembly from the parking brake shoe lever.

      Tech Tips

      Refer to the procedures up to the removal of the brake shoe.

      Click here

    2. B003RJ0

      Remove the 2 bolts and disconnect the No. 2 parking brake cable assembly from the backing plate.

    3. Disconnect the No. 2 parking brake cable assembly from the parking brake equalizer sub-assembly.

      B003S8VC01
      *1 No. 2 Parking Brake Cable Assembly *2 Parking Brake Equalizer Sub-assembly

    4. Remove the 4 bolts and No. 2 parking brake cable assembly.

  22. REMOVE PARKING BRAKE EQUALIZER SUB-ASSEMBLY


    1. B003O78

      Remove the 2 bolts and parking brake equalizer sub-assembly.

  23. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. Disconnect the No. 3 parking brake cable assembly from the parking brake shoe lever.

      Tech Tips

      Refer to the procedures up to the removal of the brake shoe.

      Click here

    2. B003P3V

      Remove the 2 bolts and disconnect the No. 3 parking brake cable assembly from the backing plate.

    3. Remove the clip.

      B003JOUC01
      *1 No. 3 Parking Brake Cable Assembly - -

    4. Remove the 4 bolts, nut and No. 3 parking brake cable assembly.