PARK / NEUTRAL POSITION SWITCH ADJUSTMENT

PROCEDURE


  1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. Move the shift lever to N.

    2. Remove the bolt of the park/neutral position switch assembly.

    3. Clean the bolt and the bolt hole.

    4. Apply adhesive to 2 or 3 threads on the end of the bolt.

      Adhesive
      Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
    5. B003MVKC10
      *a Neutral Basic Line
      *b Groove

      Align the neutral basic line with the groove as shown in the illustration.

    6. Hold the switch in position and tighten the bolt.

      Torque:
      12.8 N*m  { 131 kgf*cm, 9 ft.*lbf }

  2. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

    Click here