VALVE BODY ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the transmission valve body assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedures Effects/Inoperative when not Performed Link

  • Transmission valve body assembly

  • Any of the shift solenoid valves

 Reset memory

  • Large shift shock

  • Engine overruns

Click here

PROCEDURE


  1. REMOVE TRANSMISSION WIRE

    Click here

  2. REMOVE TRANSMISSION VALVE BODY ASSEMBLY


    1. Remove the bolt, detent spring cover and detent spring.

    2. B003SF3

      Remove the 19 bolts and transmission valve body assembly.

  3. REMOVE CHECK BALL BODY

    Click here