CRUISE CONTROL MAIN SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for RHD vehicles.

PROCEDURE


  1. INSTALL CRUISE CONTROL SWITCH WIRE


    1. Connect the connector and install the cruise control switch wire to the cruise control main switch.

  2. INSTALL CRUISE CONTROL MAIN SWITCH


    1. B003J7QC02
      *1 Cruise Control Switch Wire
      *a Rib

      Pass the cruise control switch wire under the rib as shown in the illustration, and temporarily install the cruise control main switch with the 2 screws.

    2. Tighten the 2 screws in the order as shown in the illustration to install the cruise control main switch.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }

    3. Connect the connector.

  3. INSTALL HORN BUTTON ASSEMBLY

    Click here

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  5. CHECK SRS WARNING LIGHT

    Click here