ENGINE SWITCH REMOVAL

PROCEDURE


  1. REMOVE STEERING WHEEL ASSEMBLY (for LHD)

    Click here

  2. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for LHD)

    Click here

  3. REMOVE ENGINE SWITCH (for LHD)


    1. B003P21

      Detach the claw on the top side of the engine switch, and then tilt the engine switch and detach the claw on the bottom side as shown in the illustration.

    2. Disconnect the engine switch connector and remove the engine switch.

  4. REMOVE NO. 1 SWITCH HOLE BASE (for RHD)

    Click here

  5. REMOVE ENGINE SWITCH (for RHD)


    1. B003MLD

      Detach the 2 claws and remove the engine switch.