GLOW PLUG CONTROLLER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE GLOW PLUG CONTROLLER

    B003P0L

    1. Disconnect the 4 connectors and detach the clamp from the glow plug controller.

    2. B003KIH

      Remove the bolt and glow plug controller.

  4. REMOVE NO. 1 GLOW PLUG CONTROLLER BRACKET


    1. Remove the 2 screws and No. 1 glow plug controller bracket from the glow plug controller.

  5. REMOVE NO. 2 GLOW PLUG CONTROLLER BRACKET


    1. Remove the 2 screws and No. 2 glow plug controller bracket from the glow plug controller.