GLOW PLUG INSTALLATION

PROCEDURE

1. INSTALL GLOW PLUG ASSEMBLY

   

   
   

   1. Using a 12 mm deep socket wrench, install the 4 glow plugs.

      Torque:

      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

2. INSTALL NO. 1 GLOW PLUG CONNECTOR

   
   

   1. Install the glow plug connector by uniformly tightening the 4 nuts.

      Torque:

      2.2 N*m  { 22 kgf*cm, 19 in.*lbf }

   2. Install the 4 screw grommets.

   3. Install the wire harness with the nut.

      Torque:

      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

3. INSTALL INTAKE AIR CONNECTOR

   Click here

4. INSTALL NO. 2 INTAKE AIR CONNECTOR BRACKET

   Click here

5. INSTALL VACUUM SWITCHING VALVE BRACKET

   Click here

6. INSTALL DIESEL THROTTLE BODY ASSEMBLY

   Click here