GLOW PLUG ON-VEHICLE INSPECTION

PROCEDURE


  1. CHECK GLOW PLUG ASSEMBLY

    B003LT3C01
    *1 Screw Grommet

    1. Remove the screw grommet.

    2. Measure the resistance according to the value(s) in the below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      Glow plug terminal - Body ground 20°C (68°F) Approx. 0.95 Ω

      • If the result is not as specified, replace the glow plug assembly.

      Note


      • Be careful not to damage the glow plug pipes, as this may cause an open circuit or shorten the life of the glow plug assemblies.

      • Do not allow oil or gasoline to contact the glow plug assembly when cleaning it.

      • Clean any oil on the terminal and bakelite washer with a dry cloth.

      • Do not apply more than 11 V to the glow plug, as this may cause an open circuit.