FRONT BRAKE FLEXIBLE HOSE INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedures listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT NO. 1 WHEEL CYLINDER TUBE LH


    1. B003N95C03
      *a Torque Wrench Fulcrum Length

      Using a union nut wrench, install the front No. 1 wheel cylinder tube LH to the disc brake cylinder assembly LH.

      Torque:
      Specified tightening torque
      15.2 N*m  { 155 kgf*cm, 11 ft.*lbf }

      Tech Tips


      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

        Click here

      • When using union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 162 mm (6.3779 in.)): 13.4 N*m (137 kgf*cm, 10 ft.*lbf)

      Note


      • Do not bend or damage the front No. 1 wheel cylinder tube LH.

      • Do not allow any foreign matter such as dirt and dust to enter the front No. 1 wheel cylinder tube LH from the connecting points.

  2. INSTALL FRONT FLEXIBLE HOSE


    1. Attach 2 new clips to the front flexible hose.

    2. B003N95C03
      *a Torque Wrench Fulcrum Length

      Using a union nut wrench, connect the flexible hose to the brake line and front No. 1 wheel cylinder tube LH while holding the front flexible hose with a wrench.

      Torque:
      Specified tightening torque
      15.2 N*m  { 155 kgf*cm, 11 ft.*lbf }

      Tech Tips


      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

        Click here

      • When using union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 162 mm (6.3779 in.)): 13.4 N*m (137 kgf*cm, 10 ft.*lbf)

      Note


      • Do not bend or damage the brake line and front No. 1 wheel cylinder tube LH.

      • Do not allow any foreign matter such as dirt and dust to enter the brake line and front No. 1 wheel cylinder tube LH from the connecting points.

  3. BLEED BRAKE LINE (w/ VSC)

    Click here

  4. BLEED BRAKE LINE (w/o VSC)

    Click here

  5. BLEED CLUTCH LINE (for Manual Transmission)

    Click here

  6. INSTALL FRONT WHEEL

    Click here