BRAKE BOOSTER REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. DRAIN BRAKE FLUID

   Note

   Wash off brake fluid immediately if it comes in contact with any painted surface.

2. REMOVE BRAKE PEDAL RETURN SPRING

   Click here

3. REMOVE PUSH ROD PIN

   Click here

4. REMOVE BRAKE MASTER CYLINDER PUSH ROD CLEVIS

   
   

   1. Loosen the push rod clevis lock nut.

   2. Remove the brake master cylinder push rod clevis.

5. DISCONNECT VACUUM HOSE

   
   

   1. Slide the clip and disconnect the vacuum hose from the brake vacuum check valve assembly.

6. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY

   Click here

7. REMOVE BRAKE BOOSTER ASSEMBLY

   
   

   1. Remove the brake vacuum check valve assembly from the brake booster assembly.

   2. Remove the vacuum warning switch assembly from the brake booster assembly.

      Click here

   3. Remove the 2 grommets from the brake booster assembly.

   4. 

      Remove the 4 nuts.

   5. Pull out the brake booster assembly with the brake booster gasket.

      Note

      Do not damage the brake lines.

8. REMOVE BRAKE BOOSTER GASKET