BRAKE PEDAL REASSEMBLY

PROCEDURE


  1. INSTALL BRAKE PEDAL PAD

  2. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER

    Click here

  3. INSTALL BRAKE PEDAL SUB-ASSEMBLY


    1. B003OVDC01
      *1 Brake Pedal Sub-assembly
      *2 Brake Pedal Shaft Collar
      *3 Bush
      *4 Brake Pedal Shaft
      B003R2S Lithium soap base glycol grease

      Apply a light coat of lithium soap base glycol grease to 2 new bushes and the brake pedal shaft cooler.

    2. Install the brake pedal shaft collar and 2 bushes to the brake pedal sub-assembly.

    3. Install the brake pedal sub-assembly to the brake pedal support sub-assembly with the brake pedal shaft and nut.

      Torque:
      26 N*m  { 265 kgf*cm, 19 ft.*lbf }