TIRE PRESSURE WARNING RESET SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL TIRE PRESSURE WARNING RESET SWITCH


    1. Attach the 2 claws to install the tire pressure warning reset switch.

  2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  3. INSTALL SHIFTING HOLE COVER SUB-ASSEMBLY (for Automatic Transmission)

    Click here

  4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  5. INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  6. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  7. INSTALL INSTRUMENT PANEL REGISTER BEZEL GARNISH

    Click here

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  9. CHECK SRS WARNING LIGHT

    Click here