TIRE PRESSURE WARNING RESET SWITCH INSTALLATION

PROCEDURE

1. INSTALL TIRE PRESSURE WARNING RESET SWITCH

   
   

   1. Attach the 2 claws to install the tire pressure warning reset switch.

2. INSTALL NO. 1 SWITCH HOLE BASE

   
   

   1. Install the No. 1 switch hole base.

      Click here

   2. Connect the connectors.

3. INSTALL INSTRUMENT SIDE PANEL LH

   Click here

4. INSTALL COWL SIDE TRIM BOARD LH

   Click here

5. INSTALL FRONT DOOR SCUFF PLATE LH

   Click here

6. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

   Click here

7. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

   Click here

8. INSTALL INSTRUMENT PANEL REGISTER BEZEL GARNISH

   Click here