TIRE PRESSURE WARNING RESET SWITCH REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. PRECAUTION

   Note

   After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

   Click here

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   CAUTION:

   Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

3. REMOVE INSTRUMENT PANEL REGISTER BEZEL GARNISH

   Click here

4. REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

   Click here

5. REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

   Click here

6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

   Click here

7. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for Automatic Transmission)

   Click here

8. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

   Click here

9. REMOVE TIRE PRESSURE WARNING RESET SWITCH

   
   

   1. 

      Detach the 2 claws to remove the tire pressure warning reset switch.