REAR LATERAL CONTROL ROD INSTALLATION

PROCEDURE


  1. TEMPORARILY INSTALL REAR LATERAL CONTROL ROD ASSEMBLY


    1. Temporarily install the rear lateral control rod assembly with the 2 bolts and 2 nuts.

  2. STABILIZE SUSPENSION

    Click here

  3. TIGHTEN REAR LATERAL CONTROL ROD ASSEMBLY

    B003OGT

    1. Tighten the nut and bolt.

      Torque:
      96 N*m  { 979 kgf*cm, 71 ft.*lbf }

      Tech Tips

      While fixing the bolt in place, tighten the nut.

    2. B003PZ7

      Tighten the nut and bolt.

      Torque:
      96 N*m  { 979 kgf*cm, 71 ft.*lbf }

  4. PERFORM INITIALIZATION (w/ Automatic Headlight Beam Level Control System)

    Click here

  5. INSPECT AUTOMATIC LIGHT CONTROL SYSTEM (w/ Automatic Headlight Beam Level Control System)

    Click here

  6. INSPECT HEADLIGHT AIMING (w/ Automatic Headlight Beam Level Control System)

    Click here