REAR LATERAL CONTROL ROD REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the rear lateral control rod removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedures Effects/Inoperative when not Performed Link
The vehicle height changes due to replacement of suspension components or after performing such operations as removal and reinstallation Headlight leveling ECU assembly initialization Headlight leveling function

Click here

PROCEDURE


  1. REMOVE REAR LATERAL CONTROL ROD ASSEMBLY

    B003PZ7

    1. Remove the bolt and nut.

    2. B003OGT

      Remove the bolt, nut and rear lateral control rod assembly.

      Tech Tips

      While fixing the bolt in place, loosen and remove the nut.